The secret of success of our corporate management

The managing partners Boris Schneidhuber and Bernhard König and the operational managers Michael Schurm and Michael Wagner (from left to right) are committed to a clear management model.

We take responsibility for our company

We derive sub-strategies for the different areas from the overall strategy. We inform the employees comprehensively in order to give them a framework for their own tasks. We make it clear that our company is defined by the totality of the employees and that the value and quality of AKE results from the sum of all employee qualities.

We set clear goals and recognise achievements

We encourage our employees to give their best. The higher the quality and performance, the more successful we are in competition. We develop the team goals as well as the goals of each individual together and provide the necessary resources to achieve them. All goals are achievable, challenging and measurable. Everyone participates appropriately in the overall success of the company.

We promote and develop our employees according to their potential.

It is our task to recognise the potential of our employees and to promote them individually and in a targeted manner. The further development of our employees is in line with the interests of the company and personal life planning. All employees are encouraged to continuously expand their knowledge with the support of the company.

We create space for innovation and creativity

It is our task to create space for creativity and willingness to change, to encourage the courage to come up with unconventional ideas and to support our employees in pursuing unusual solutions and ways of working.

We communicate openly and express our appreciation

We promote partnership, team development and create an atmosphere of mutual trust. Criticism is constructive, timely and factual. We create a climate in which our employees feel comfortable and enjoy their work.

Our World of Automation | Learn more about our values and about the passion for our automation solutions in the team AKE!

Resources
A central point for us is environmental protection. We pay attention to a resource-saving way of working - the material consumption and the use of resources should be kept as low as possible.
We also integrate our suppliers in environmental protection. We take care to order from environmentally responsible suppliers, to minimize transport routes where possible and to use environmentally friendly resources.

Compliance
An important part of our management is compliance. This area includes legal requirements as well as our own rules of conduct, which we have set ourselves. We want to secure the trust of our employees, customers and business partners. Compliance is one of the key criteria for successful corporate governance and contributes to the social and economic success of AKE.

Quality
For AKE sustainability is the observance of quality standards. We work according to the standard DIN EN ISO 9001: 2015. We have set ourselves the goal of building excellent long-term and sustainable customer relationships based on trust and good cooperation. We constantly improve our quality, carry out a target planning as well as a risk and opportunity planning, thus ensuring the sustainable achievement of our internal quality requirements.

Our team
For us, sustainability is the responsible management of our employees. The group identity is a central point of our way of working: We ensure a motivating working atmosphere. We pay attention to equal opportunities and diversity. We support our employees according to their strengths. We support our team with non-tariff benefits, pay attention to safety at work, to health-promoting measures and to work-life balance. We want to create a pleasant and motivating working environment for our team.

Education
Sustainability includes the promotion of in-house junior staff. We take care to train our own specialists of tomorrow. We give young people a perspective through well-founded training in an exciting, international environment. In doing so, we make sure that our trainees are quickly integrated into day-to-day business, that they are given responsibility and that we support them in their development. We want to strengthen the personality of our trainees and promote their social skills.

Social
Sustainability is a question of social commitment. We support numerous regional projects. We help disadvantaged children and adolescents, support social institutions, educational workshops and donation events. At the same time our employees feel responsible and support us regularly during the donation campaigns or participate in donation events themselves.

Our World of Automation | Learn more about our values and about the passion for our automation solutions in the team AKE!

Founded in 1978, AKE-technologies has been a valuable and innovative partner of the world's leading automobile manufacturers and suppliers for more than three decades. Our products and services contribute in making vehicles ever safer and better. This is reflected not only in the technical quality in the vehicle, but also in the finishing quality in the passenger compartment, for instance. This means AKE technology solutions make an important contribution in the ability to meet the growing demands of the buyer and the high competitive pressure in the automobile industry.

We are growing with this development and are, therefore, convincing with a broad-based range of technology and services. Depending on the need, we offer high quality tools, high-performance standalone systems or fully-automated, integrated production and test systems. Our offering also includes comprehensive services in all process steps beginning with development and design, prototyping and project management up to production and assembly. Consultation, individual support and a broad after-sales offering are a matter of course for us and underline the claim of enthusing our customers.

In short, we supply tailor-made, state-of-the-art technology solutions and all-inclusive support – at all times, everywhere and from a single source.

Our World of Automation | Learn more about our values and about the passion for our automation solutions in the team AKE!

The headquarters of the AKE Group is located in Passau, Lower Bavaria. Our assembly lines and system concepts are developed, designed and manufactured here.

In order to offer our international customers the best possible service, we have established branches in Romania, China and the USA. We also work with numerous sales and service partners in the United States, Europe and Asia.

International service partners - Overview

 

G.U. Ltd. 507 Lordland EZ Tower, 153 Kumi-dong, Bundang-gu, Seongnam-City, Gyeonggi-do Südkorea	Dynawin Xiangzhi Industry Room 707, Building 1 Taiyang Road 2266, Xiangcheng District, Suzhou, Jiangsu China
IMV CORPORATION 2-6-10 Takejima Nishiyodogawaku Osaka 5550011 Japan	Elektroautomatik Kärrlyckegatan 20 B 418 78 Gothenburg Schweden
ALAVA Ingenieros Edificio Antalia. Albasanz 16 28037 Madrid Spanien	ALAVA Ingenieros Taguspark- Edifício Qualidade - Bloco B2, 1B 2740-120 Porto Salvo Portugal
NOFFZ Technologies de Mexiko S. de R.L. de C.V. Av. Fray Pedro de Gante #6920 32439 Juárez, Chih Mexiko

Contact us via our contact form!

---

Our World of Automation | Learn more about our values and about the passion for our automation solutions in the team AKE!

Videoanleitungen
1. Einleitung: Begriffe - Beiträge, Module, Menü
2. Bedienung Editor (Texte, Bilder, Links, PopUp, Galerie)
3. Einen Beitrag komplett neu anlegen inkl. Menüpunkt
4. Module bearbeiten / zu einem Menüpunkt zuordnen
---
5. Aktuelles Beitrag anlegen
6. Slider bearbeiten

1. Begriffe, Einleitung etc.
Hier geht es grundsätzlich um die Unterschiede zwischen Menü, Modul und Beitrag. Menüeintrag ist oben in der Querleiste und verweist auf einen Beitrag. Beitrag ist der eigentliche Inhalt einer Seite in der Mitte der Seite. Ein Modul ist ein Inhalt, der FREI auf der Seite platzierbar ist und einem Menüpunkt zugeordnet werden kann.

2. Bedienung Editor
Hier wird Ihnen die Grundfunktion des Editors erklärt - wie funktioniert das Einfügen eines Bildes - einer Galerie - Links,...
Bitte beachten Sie, dass Fotos, die hochgeladen werden sollen, nicht größer als 1800 Pixel Breite ODER 1200 Pixel Höhe haben sollten!

3. Einen Beitrag komplett anlegen inkl. Menüpunkt
Der wohl erstmal wichtigste Punkt: Sie legen alle Beiträge und die Menüstruktur an, die Sie später für die Seite brauchen: Über uns, Produkte, etc. ... Hier wird einmal komplett gezeigt, wie Sie einen Beitrag mit dazugehörigem Navigationspunkt anlegen.

4. Module bearbeiten / zuordnen
Da viele Informationen in den Modulen gespeichert sind (Telefonnummern, Daten etc.) können Sie diese auch bearbeiten. Sie können dabei auswählen, welche Module auf welcher Seite angezeigt werden.

---

Überschriften Formatierung
Hier muss man nichts mehr selber machen, sondern oben nur unter "Format" Überschrift 1-6 auswählen:

Überschrift 1

Überschrift 2

Überschrift 3

Überschrift 4

Überschrift 5

Überschrift 6

Ganz normaler Text (Absatz)
Hier ein Link

Please complete all required fields!

prename(*)

Invalid Input

phone(*)

Invalid Input

mail(*)

Invalid Input

message

Senden Sie uns Ihre Nachricht

Yes, I have read the data protection declaration and agree that the data I have provided will be collected and stored electronically. My data will only be used strictly for the purpose of processing and answering my request. By sending the contact form, I agree to the processing.

---

I would like a call back

Invalid Input

send

I. General, conclusion of contract, content of contract

1. The contractor (usually "AN") only delivers according to the following general terms and conditions, even if reference is no longer expressly made in the case of permanent business relationships.
2. Deviating terms and conditions of the client (usually "AG"), which the AN does not expressly recognize in writing, are non-binding for him, even if he does not expressly contradict the AG. Silence on the order confirmation, which refers to different terms and conditions, is not to be regarded as consent. By accepting our delivery, the customer irrevocably agrees to the exclusive validity of our general terms and conditions.
3. All offers submitted by the Contractor are subject to change. Orders are only considered accepted when we have confirmed them in writing.
4. The contract is concluded with inclusion of these terms and conditions with the written (§ 126 BGB) or textual (§126 b BGB) order confirmation of the contractor.

5. The documents belonging to the offer such as illustrations, drawings, weight and dimensions, power consumption and performance details are only approximate unless they are expressly designated as binding. The AN reserves ownership and copyright to cost estimates, drawings and other documents. They may not be made accessible to third parties. The Contractor undertakes to make plans designated by the Client as confidential only available to third parties with his consent.
6. Design and manufacturing technology as well as changes to the delivery item due to legal regulations are reserved, insofar as the delivery item is changed only insignificantly and the changes are reasonable for the AG. The AN will notify the AG of such changes as early as possible.
7. The Contractor reserves the right to make modifications to the subject matter of the contract, to the extent that they are technically equivalent or represent a technical improvement. However, the Contractor undertakes to inform the Client of this.
8. If the delivery item is subject to special regulations in countries outside the Federal Republic of Germany, the AG is responsible for its observance and is obliged to inform the Contractor. If the contractor has changed the intended type of execution, he must inform the client immediately.

II. Prices and payment

1. In the absence of a special agreement, the agreed prices apply ex works including loading in the factory, but excluding packaging and unloading. They are net plus the applicable sales tax.
2. Unless otherwise agreed in writing, the payments are to be made by the client without any deduction á account:
- 30% after conclusion of the contract
- 60% after acceptance in the factory before delivery
- 10% after final acceptance
No. III.4 applies accordingly
3. The purchaser is only entitled to withhold payments or to offset them with counterclaims insofar as his counterclaims are undisputed or have been legally established.
4. If the terms of payment are not complied with or if circumstances arise that are likely to reduce the creditworthiness of the AG, the Contractor has an immediate right of termination. In this case, he has the right to request cash payment against return of the bills regardless of the duration of the bills accepted. Such circumstances also entitle the Contractor to only perform outstanding services against advance payment or security.
5. If payment deadlines are exceeded, the Contractor is entitled to charge statutory default interest among non-consumers. The contractor reserves the right to prove higher damage caused by delay.

III. Delivery time, delivery delays

1. The delivery time results from the agreements of the contracting parties and begins at the earliest with the receipt of the order confirmation. Your compliance by the contractor presupposes that all commercial and technical questions between the contracting parties have been clarified and that the contractor has all its obligations, such as: B. Provides proof of the required official certificates or has paid permits and all due claims of the Contractor. If this is not the case, the delivery time will be extended accordingly. The same applies if unforeseen obstacles occur which the Contractor could not avert despite reasonable care, e.g. B. Breakdowns, strikes, lockouts, lack of energy and raw materials as well as other events of force majeure, also with suppliers of the contractor. This does not apply if the contractor is responsible for the delay.
2. To the extent that as a result of the 1 mentioned circumstances, the fulfillment of the contract for the contractor is impossible or economically no longer reasonable, he can withdraw in whole or in part from the contract. If the contractor's withdrawal is based on this, the client has no claims for damages. If the contractor wishes to exercise the right of withdrawal, he must inform the client immediately after becoming aware of the circumstances justifying the withdrawal. If the impossibility or inability occurs during the delay in acceptance or if the AG is solely or largely responsible for these circumstances, he remains obliged to provide the consideration.
3. Compliance with the delivery deadline is subject to correct and timely self-delivery. The Contractor shall notify as soon as possible of any emerging delays.
4. The delivery deadline is met if the delivery item has left the AN's works by the end of the delivery or if the goods are ready for dispatch. Insofar as an acceptance has to be carried out, the acceptance date is decisive - in the case of justified refusal to accept the goods, alternatively the notification of readiness for acceptance. This regulation applies to no. II.2. corresponding.5. If the shipment or the acceptance of the delivery item is delayed for reasons for which the AG is responsible, he will be charged the costs incurred due to the delay, starting one month after notification of readiness for dispatch or acceptance. In the case of storage in its own plant, the Contractor can charge at least 0.5% of the contract price of the stored delivery parts per month.
6. Earthwork and masonry work, lifting fences, scaffolding, roof storage, material and installation work as well as other work required for the installation of the contractual object from the respective connections of the contractual object are not covered by the contractor's delivery obligation.
7. If the Contractor does not meet an agreed delivery date, the Client can set the Contractor a reasonable grace period and is entitled to withdraw from the contract after its fruitless expiry.

IV. Transfer of risk, acceptance

1. The risk passes to the AG if the delivery item has left the factory, even if partial deliveries have been made or the AN has other services, e.g. B. has taken over the shipping costs or delivery and installation. If an acceptance has to take place, this is decisive for the transfer of risk. It must be carried out immediately on the admission date, alternatively after the contractor has reported that he is ready for acceptance. The AG may not refuse acceptance if there is an insignificant defect.
2. If the delivery or the acceptance is delayed or does not take place as a result of circumstances that are not attributable to the Contractor, the risk passes to the Customer from the day the delivery is notified or readiness for acceptance. The Contractor undertakes to take out the insurance that the Client requires at the Client's expense.
3. Partial deliveries are permitted, as far as reasonable for the AG.V. Retention of title

1. The Contractor reserves ownership of the delivery item until all payments from the delivery contract have been received.
2. The Contractor is entitled to insure the delivery item against theft, breakage, fire, water and other damage without the consent of the Client, unless the Client has demonstrably taken out the insurance himself.
3. The AG may not sell, pledge or assign the delivery item as security. In the event of seizures, confiscation or other dispositions by third parties, the contractor must be informed immediately. If the client fails to do this, he is liable to the contractor for the resulting damage.
4. If the orderer behaves contrary to the contract, in particular in the event of late payment, the contractor is entitled to take back the delivery item after a reminder and the orderer is obliged to surrender it.
5. Due to the retention of title, the contractor can only demand the delivery item if he has withdrawn from the contract.
6. The application to open insolvency proceedings entitles the Contractor to withdraw from the contract and to demand the immediate return of the delivery item.

VI. Warranty and notice of defects

1. To protect its rights, the AG must carefully check the delivery item immediately upon receipt and, if recognizable, notify the Contractor in writing or in writing of any defects immediately.
2. The Contractor is liable for defects in the delivery, excluding further claims, as follows:
3. If there is a defect in the delivery item, the Contractor is entitled to choose whether to remedy the defect or to deliver a new delivery item. In the event of rectification of defects, the Contractor bears the costs only to the extent that these do not increase because the object of purchase was moved to a location other than the place of performance and up to the amount of the purchase price. Replaced parts remain or become the property of the supplier. For essential third-party products, the contractor's liability is initially limited to the assignment of liability claims against the supplier of the third-party product. If the assigned claims cannot be enforced against the third party, the contractor is liable in accordance with these conditions.
4. If the subsequent performance fails, the AG is entitled to request withdrawal or a reduction.
5. Claims by the client that go beyond the statutory provisions are excluded. This exclusion of liability does not apply in the event of intent or gross negligence on the part of the contractor or one of his vicarious agents.
6. Claims for defects do not arise if the error is due to the violation of operating, maintenance and installation instructions, unsuitable or improper use, unsuitable equipment, unsuitable surface, faulty or negligent handling, unnatural wear and tear, as well as interventions in the delivery item by the AG or third parties.
7. AKE is liable for intent and gross negligence, in cases of product liability and according to the BDSG, in the absence of a guaranteed property, for malice, for defects of title and for personal injury in accordance with the statutory provisions.
8. In the event of simple negligence in the violation of cardinal obligations, liability is limited to damage that is predictable or typical. In addition, the contractor is only liable for simple negligence to a maximum of 15% of the total remuneration agreed for all services based on the respective contract (for recurring remuneration with respect to the respective calendar year), for all liability cases occurring in a calendar year, regardless of the legal reason. Liability for lost profits and indirect damage is excluded.
9. AKE is not liable for the retrieval of data, unless AKE caused their destruction through gross negligence or intentionally and the buyer has ensured that this data can be reconstructed from data material that is available in machine-readable form with reasonable effort.
10. Insofar as claims for damages against AKE's agents or vicarious agents exist, they expire within one year.
Otherwise, the statutory provisions apply.

VII. Place of performance, jurisdiction and choice of law

1. For all legal relationships between the contracting parties, the law of the Federal Republic of Germany, which is decisive for the legal relationships between domestic parties, applies exclusively. The UN sales law is excluded.
2. All claims of the AG - for whatever legal reasons and to the extent permitted by law - expire in 12 months.
3. The place of jurisdiction is the court responsible for the seat of the AN. However, the Contractor is entitled to file suit at the AG's headquarters.

According to § 5 TMG:

AKE-technologies GmbH
Geschäftsführer: Bernhard König, Boris Schneidhuber
Adolf-Höllinger-Straße 3
94034 Passau

Contact:

Telefon: +49 (0) 851 955 84 0
Telefax: +49 (0) 851 955 84 40
E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Value added tax:

Sales tax identification number according to §27 a Umsatzsteuergesetz:
DE 250 117 518

Information on liability incurance:

Name and registered office of insurer:
Waldherr Versicherungsmakler GmbH
Greppenfeld 12
94127 Neuburg

Geltungsraum der Versicherung: weltweit

Responsible for the content according to § 55 Abs. 2 RStV:

Boris Schneidhuber
Adolf-Höllinger-Straße 3
94034 Passau

Dispute settlement:

The European Commission provides a platform for online dispute resolution: https://ec.europa.eu/consumers/odr
Our e-mail address can be found above in the imprint..

---

Design and Programming:

SEIDL - Marketing & Werbung Passau
Inhaber: Georg Seidl
Ludwig-Thoma-Str. 2
94081 Fürstenzell

Contact:
phone: +49(0)851 205490-900
fax: +49(0)851 205490-909
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
web: www.seidl.marketing

---

Liablity for content

s a service provider we are responsible according to § 7 Abs.1 TMG for own contents on these sides according to the general laws. According to §§ 8 to 10 TMG, however, we as a service provider are not obliged to monitor transmitted or stored external information or to investigate circumstances that indicate illegal activity.

Obligations to remove or block the use of information under general law remain unaffected. A liability in this regard, however, is only possible from the date of knowledge of a specific infringement. Upon notification of appropriate violations, we will remove this content immediately.

Liability for links

Our offer contains links to external websites of third parties on whose contents we have no influence. Therefore, we can not assume any liability for these external contents. The respective provider or operator of the pages is always responsible for the contents of the linked pages. The linked pages were checked for possible legal violations at the time of linking. Illegal content was not recognizable at the time of linking.

However, a permanent content control of the linked pages is not reasonable without concrete evidence of an infringement. Upon notification of violations, we will remove such links immediately.

copyright

The content and works on these pages created by the site operators are subject to German copyright law. The reproduction, processing, distribution and any kind of exploitation outside the limits of copyright require the written consent of the respective author or creator. Downloads and copies of this site are for private, non-commercial use only.

As far as the contents on this side were not created by the operator, the copyrights of third parties are considered. In particular contents of third parties are marked as such. If you should still be aware of a copyright infringement, we ask for a note. Upon notification of violations, we will remove such content immediately.

source: eRecht24

Successful in an attractive environment

Our customers and target markets are distinguished by dynamics and innovation. As the source of inspiration in wholly different fields, we are a valuable and appreciated partner for our clients. Top products and top employees sustainably ensure our joint success.

Interesting jobs, exciting projects, performance-based compensation, further training and opportunities for promotion in a globally active company – that's what you can expect at AKE-technologies. Individual support and the possibility for active involvement make us an attractive employer.

If you want to work as part of our successful team, please send us your unsolicited application.

AKE is a global company. With an export share of 90%, our plant technology is used in numerous countries and continents. In order to be close to our customers, we have established a service base in Romania and work closely with our partners in Europe, Asia and the USA.

Our World of Automation | Learn more about our values and about the passion for our automation solutions in the team AKE!

Step by step to the perfect system

The development of innovative assembly solutions with the highest overall equipment effectiveness - that is the goal of the automation experts at AKE technologies. Our in-house departments development and construction, single part production, assembly, electrical engineering and programming work on customized solutions. In addition, we always want to offer our customers the best service – in case of system maintenance, spare parts projects or system upgrades!

Innovative technologies in development and production

From the first idea to on-site commissioning, our specialists create the ideal solution for you. Throughout the entire process we provide you with a competent contact person - true to the motto “everything from a single source”. We ensure a perfect interaction of technologies, know-how and quality. We provide you with comprehensive advice, tried and tested technology and a high level of innovation. E-technology and state-of-the-art software, including simulation programs, are of course part of the repertoire, as well as the 3D construction with CATIA that is common in the automotive industry.

Flexible and smart concepts with the highest quality - that is our benchmark

In assembly automation, we rely on smart concepts that adapt flexibly to the needs of our customers - with regard to fluctuations in quantity or the integration of other component variants on an assembly line. In doing so, we consider the product life cycle and technology trends - and have the necessary eye for developments on the market. Our experts from the different departments always develop and manufacture tailor-made technologies. When it comes to automation, we also focus on the highest quality in all areas - with ourselves, with our suppliers and with all components that are installed.

Modern solutions for assembly automation

We always want to offer our customers an advantage through innovative assembly automation.
The digitization of the development and assembly process plays a major role here. Even while the concept is being drawn up, we enable our customers to inspect the plant, consider ergonomics and carry out realistic cycle time analyzes of worker activities using our in-house virtual reality system. Later on, simulation programs allow early feasibility studies and virtual commissioning - which promises cost and time savings for our customers. Digital twins of an assembly line later allow simple remote maintenance with 1: 1 process analysis and checking of the production flow.

Our World of Automation | Learn more about our values and about the passion for our automation solutions in the team AKE!

Are you curious about our concepts?

Then take a look at our automation solutions!

As a mechanical engineering company, AKE technologies offers assembly technology for the automotive and e-mobility sectors as well as production lines for vehicle interior components, test stands for squeak and rattle analysis and systems for the environmental technology sector. In the field of assembly technology, the integration of numerous individual processes in a very small space is a particular challenge. Optimal coordination of processes and plant components enables lean production, while process-parallel monitoring of the production sequence ensures flawless processing. Our automation experts rely on digitalization in every development and manufacturing process of the plants in order to continuously optimize productivity and overall plant effectiveness.

Assembly testing technology for the automotive industry

In the field of assembly testing technology, we focus on the automotive sector. In addition, we supply assembly systems for the furniture industry, consumer goods and more. In automation, we pay attention to an efficient production process according to the required degree of automation, integrate fail-safe systems and consider ramp-up curves - always with focus on our customers' individual demands.

Assembly solutions for the e-mobility sector

In recent years, the share of assembly technology for e-mobility components has steadily increased. Starting with complete storage systems via electrical drive units up to the corresponding charging technology, the complete e-mobility product range is manufactured on AKE assembly lines. Especially in the E-Mobility sector, the design of technically clean stations and the ESD capability of the components is crucial.

Production lines for vehicle interior components

The processing of vehicle interior components places special demands on the production equipment in terms of appearance and feel. A wide range of processes are integrated into AKE technologies' production lines, from gluing stations to laminating and edgefolding processes to flame treatment. Our experts will be happy to advise you on component design to ensure optimum processing.

Test stands for Squeak and Rattle Testing

AKE technologies is the only company in the field of squeak and rattle testing that offers the complete range of knowledge and technology: from excitation technology such as vehicle and component shakers to solutions in the form of anti-friction coating application systems. By providing theoretical support as early as the development phase, our customers can benefit from our know-how in test stand construction at an early stage.

Production lines for the environmental technology

As one of the leading specialists for sophisticated plant engineering, AKE technologies has made it its business to combine economy and ecology in a meaningful symbiosis and thus to play a decisive role in the development of new green technologies. AKE supplies assembly technology for the production of cost-effective and ecologically sensible membrane filter technology.

Our World of Automation | Learn more about our values and about the passion for our automation solutions in the team AKE!

Coating processes Application of anti-friction coating Edge-folding processes › Inner or outer edge folding › With or without additional adhesive application › Edge folding of fabric, Alcantara and leather Gluing processes › 1K and 2K materials › Bonding with cyan acrylate › Heat conductive pastes › Hotmelt › Sealing adhesives › Application methods Spinning application Spraying application Bead application › Integrated testing processes Joining Processes › Clamp assembly › Clinching processes › Crimping › Force-displacement monitored processes › Pressing › Riveting processes hot riveting: plastic welding Ultrasonic riveting Wobble riveting › Welding processes Laser welding of plastics and metal Resistance welding Resistance brazing Laser welding

Signing processes › Inkjett printing › Label › Laser › Needle embossing › Stamp Stamping processes Surface treatment › Corona treatment › Flaming treatment › Ionisation (cleaning) › Plasma treatment Testing processes › 2D + 3D measurements › Acceleration/Vibration › Color testing › Electrical testing (resistance, current, voltage) › Flow testing › Force-displacement evaluation › Helium testing › Image processing Comparing parts Form/position measurements OCR › Moisture testing › Pressure testing › Temperature measurements › Torque and rotation angle testing › Weight testing

---

→ Find out more about our assembly lines:

AKE technologies is the experienced specialist for demanding system engineering with focus on the automotive sector. We develop and manufacture production systems in the fields of assembly and test engineering, vehicle interior products, disruptive noise acoustics as well as environmental engineering. Our expertise as an independent and innovative system and development partner also manifests itself in many top-of-the-range vehicles such as Porsche, BMW, Audi, Mercedes and VW.

With our patented Shaker technology, we are one of the world's leading providers in the field of disruptive noise acoustics.

Our World of Automation | Learn more about our values and about the passion for our automation solutions in the team AKE!